Article View: comp.sys.mac
Article #29445Re: RAM upgrades
From: Steve Witten
Date: Mon, 20 Jun 1988 16:56
Date: Mon, 20 Jun 1988 16:56
23 lines
1551 bytes
1551 bytes
I'll echo Rich's sentiments. I had a couple of problems though...
1). The installation directions weren't very clear so I put the case
back together without re-installing the Apple SIMMs in the prescribed
manner. When I turned on the machine, nothing. After replacing the
Apple SIMMs in the correct manner, everything was fine. I also had a
slight problem with fitting the logic board back into its slot after
the Dove SIMMs were installed.
2). You may need to adjust the Mac+'s power supply. I forget the
required setting but the Dove technical support folks can give you the
details. You'll need a voltmeter and steady hands for this...
BE SURE YOU ARE WORKING AT A STATIC-FREE WORKSTATION WHEN YOU INSTALL YOUR
UPGRADE OR YOU COULD BLAST IT INTO OBLIVION!!!!!!!!!
===============================================================================
Steve Witten steve%hpiacla@hplabs.HP.COM
Industrial Applications Center {ucbvax, hplabs}!hpda!hpdsla!hpiacla!steve
Hewlett-Packard Co. steve@hpiacla
"...I feel in touch with the modern world!..." --J. Richman
Technical Details
Message-ID:
<4860008@hpiacla.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!killer!ames!pasteur!helios.ee.lbl.gov!nosc!ucsd!ucsdhub!hp-sdd!hplabs!hpl-opus!hpccc!hp-sde!hpda!hpdslab!hpiacla!steveReferences:
<5844@spool.cs.wisc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!killer!ames!pasteur!helios.ee.lbl.gov!nosc!ucsd!ucsdhub!hp-sdd!hplabs!hpl-opus!hpccc!hp-sde!hpda!hpdslab!hpiacla!steve From: steve@hpiacla.HP.COM (Steve Witten) Newsgroups: comp.sys.mac Subject: Re: RAM upgrades Message-ID: <4860008@hpiacla.HP.COM> Date: 20 Jun 88 16:56:20 GMT References: <5844@spool.cs.wisc.edu> Organization: Hewlett Packard Lines: 23