🚀 go-pugleaf

In article <8WjzyPy00W0GABU04R@andrew.cmu.edu> mm3d+@andrew.cmu.edu (Matt McNally) writes:
>A friend of mine has asked me to look into general CAD systems for
>his small architecture firm.  Yes, his request was indeed that general.
>
>I often see various mentionings of CAD packages in the Macish'
>magazines, but very little actual information about the specific programs;
>most packages seem to be more *mechanically* oriented.

[stuff deleted]

>
>Any information you could send would be very helpful; also, does any
>information about plotters, or 'large scale rendering' devices (30"X42")
>would be great.
>
>Please send your info to:  mm3d@andrew.cmu.edu.
>
>Thanks in advance,
>
>matt

The best thing I can say is look in the July issue of MacUser magazine.
They rate ALL of the available (at the time) CAD packages for the Mac,
along with some related programs.

If you can give me a USNAIL mailing address, I'll send you a BIG envelope
I got when I was looking into CAD packages on the Mac for my father.
You can then send in the "more information, please" letter and get even
more info than I can send you.  If you can't give me a USNAIL address,
I guess I can EMAIL you a personally typed transcript, but I'd rather
not (if I can avoid it).

BTW, I posted this because there might be others interested in this
subject -- so don't bitch at me for posting something that you feel I
should have EMAIL'ed.

-Brad Knowles

UUCP: ...!ihnp4!occrsh!uokmax!blknowle     ARPA: blknowle@uokmax.ecn.uoknor.edu
SNAIL: 1013 Mobile Circle
       Norman, OK  73071-2522
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Philosophy of Boris Yeltsin: "If one wants to be unemployed, one will
	criticize ones' boss.  If one wants to be sent to Siberia, one
	will criticize the wife of ones' boss."
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Disclaimer: (The above opinions are my own.  They have nothing to do with the
		Univeristy of Oklahoma nor intelligance of any sort. :-)