🚀 go-pugleaf

Jasmine "Flower Icon" - Driver Patch
====================================

   Several INITs, most notably "FaceLift," have appeared recently which
allow you to change the SCSI icon in memory (i.e. without resorting to
hacking the SCSI driver itself).
   Unfortunately, the new Jasmine drivers have a feature which can be
annoying, to say the least, if you want to use one of these INITs.
   Going on the assumption that you can't/won't change its "flower" icon,
the driver modifies the icon data directly to display a numeral 0-6,
corresponding to the drive's SCSI address. If you have changed the icon
with an INIT (or otherwise), the new icon is "clobbered" by the alteration.

  The following patch (to the 'SDRV' resource) causes the driver to
ignore the routines that modify the icon, allowing Jasmine owners to
use INITs such as "FaceLift" to change the SCSI icon.

  Using Fedit or other hex editor, open the Jasmine Install application.
If you're using ResEdit, open the 'SDRV' resource in Jasmine Install.

  Search for:  062B 0030 011C 4A6A 0028
  Change to :  " "  " "  " "  6000 0222

  Once the modification has been made, simply boot from a floppy
containing the modified Jasmine Install, and reinstall the SCSI
driver.

Disclaimer:
-----------
  This works on my Jasmine Direct Drive 20, with version 2.34 of the
Format/Install software. It may or may not work for you. Make sure you
back up your drive before installing ANY modified driver!!!


-- 
==========      .......     ==========================================
Ken McLeod     :.     .:    uucp: {trwrb hplabs}!felix!dhw68k!thecloud
==========    :::.. ..:::   InterNet: thecloud@dhw68k.cts.com
                 ////       ==========================================