Article View: comp.sys.mac
Article #31262Re: Mac II to mainframe via ISN at 19.2K isn't working!
From: Robert K Shull
Date: Wed, 17 Aug 1988 13:39
Date: Wed, 17 Aug 1988 13:39
20 lines
1443 bytes
1443 bytes
In article <451@mace.cc.purdue.edu> ajq@mace.cc.purdue.edu (John O'Malley) writes: > >When we attempted to bounce the ISN box up to 19200 baud, we found that none >of the software worked. About every 1 out of 3 characters typed in MacKermit >and MacTerminal yield garbage. I couldn't even get past the password > >One of my coworkers (an IBM-type person) had a good laugh when we tested >our Mac's ISN line with a lowly IBM Convertible running Kermit-MS at 19.2K, One thing to check would be your flow control. Our PC-compatibles "run" at 19200 also, but the actual throughput is closer to 4800 baud. They run at 19200 by using flow control. Does the ISN use xon/xoff, DTR, or some other method? Is your software on the Mac II set the same way? I've had no trouble with a Mac II at 38400 (Versaterm PRO, I think) through an Encore Annex. Robert -- Robert K. Shull University of Oklahoma, Engineering Computer Network att!occrsh!uokmax!rob CIS 73765,1254 Delphi RKSHULL sun!texsun!uokmax!rob
Technical Details
Message-ID:
<1688@uokmax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!rutgers!att!occrsh!uokmax!robReferences:
<451@mace.cc.purdue.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!rutgers!att!occrsh!uokmax!rob From: rob@uokmax.UUCP (Robert K Shull) Newsgroups: comp.sys.mac Subject: Re: Mac II to mainframe via ISN at 19.2K isn't working! Message-ID: <1688@uokmax.UUCP> Date: 17 Aug 88 13:39:57 GMT References: <451@mace.cc.purdue.edu> Reply-To: rob@uokmax.UUCP (Robert K Shull) Organization: University of Oklahoma, Norman, OK Lines: 20