🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.mac
Article #33123

Re: Re: Deskjet for mac

#33123
From: Erik Kilk
Date: Mon, 10 Oct 1988 15:43
18 lines
1005 bytes

		7 x   9  sq inch print area
         x    300 x 300  dots per sq inch
         x         10/8  bits per serial interface byte
         /         9600  bits per second	(19200 baud)
         /           60  seconds per minute
         --------------
                     12  minutes per page	(6 minutes per page)

If the Macintosh is digitizing the whole page, it will take 12 - 18 mintues
just to squirt it out over 9600 baud line.  (18 for a full 8.5 x 11 inch area)
At 19.2 k baud it will take 6 minutes. 

This is why the drivers had better take advantage of the DeskJet's data
compression protocal.

Erik Kilk
Technical Details
Message-ID: <810003@hpsad.HP.COM>
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!hp-sde!hpcea!hpnmdla!hpsad!erik
References: <6484@batcomputer.tn.cornell.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!hp-sde!hpcea!hpnmdla!hpsad!erik
From: erik@hpsad.HP.COM (Erik Kilk)
Newsgroups: comp.sys.mac
Subject: Re: Re: Deskjet for mac
Message-ID: <810003@hpsad.HP.COM>
Date: 10 Oct 88 15:43:58 GMT
References: <6484@batcomputer.tn.cornell.edu>
Organization: HP Signal Analysis Division - Rohnert Park, CA
Lines: 18