68000 clip pointers needed

Article View: comp.sys.mac

Article #33307

#33307

From: Anders Sjolund
Date: Wed, 12 Oct 1988 18:18

24 lines
1246 bytes

As I have several 68020 processors, some Mac+ computers at work and spare time,
I am thinking of constructing a cheapo accellerator for the Mac+. I am not
really happy about poking around with a soldering iron in the innards of the 
Mac, so...

Where can I get clips to connect the accellerator board to the 68000 (nearest
dealer in Sweden/Europe if you happen to know it)? Are the clips mechanically
stable - do I need to do something to keep the clip/accellerator board in
place ?

Are the Mac+ ROMs 68020 smart, or do I have to do ROM patches ?

If I ground the bus request pin on the 68000, does it relinquish the bus 
directly on reset ?


AdvTHANKSance /anderss@uplog.se

-- 
Real life:      Anders Sjolund                  Email:  anderss@uplog.se
Snail mail:     TeleLOGIC Uppsala AB            Phone:  +46 18 189409
                POB 1218
                S - 751 42 Uppsala, Sweden

Technical Details

Message-ID: <309@uplog.se>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcvax!enea!kth!sics!uplog!anderss

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcvax!enea!kth!sics!uplog!anderss
From: anderss@uplog.se (Anders Sjolund)
Newsgroups: comp.sys.mac,swnet.mac
Subject: 68000 clip pointers needed
Message-ID: <309@uplog.se>
Date: 12 Oct 88 18:18:30 GMT
Reply-To: anderss@uplog.UUCP (Anders Sjolund)
Organization: TeleLOGIC Uppsala AB
Lines: 24