🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.mac
Article #36005

Re: Monitor Noise...

#36005
From: Barry Brown
Date: Thu, 05 Jan 1989 09:00
36 lines
2570 bytes
In article <5140@phoenix.Princeton.EDU> zimerman@phoenix.Princeton.EDU (Jacob Ben-david Zimmerman) writes:
|Hi net!  I have a somewhat nasty problem.  Recently, my Mac II
|Applecolor RGB monitor was being moved out of storage, and due to
|circumstances we need not go into, it got dropped and suffered a shock.
|It was in its high-impact polystyrene neato Apple official packaging,
|and suffered no VISIBLE damage, and the picture is fine.  However, it
|has developed a nasty trait: When it is powered up after being 'cold'
|(i.e. off for more than two-three minutes or so) it produces a LOUD
|vibration, which drowns out the usual Mac II chord and sounds as if a
|moving part is involved. I know of no moving parts in the monitor, at
|least none that might produce this, but does anyone out there have any
|ideas?  I don't know how to escribe the noise better; it lasts from
|between a half second to a second, almost like a wheel that was scraping
|hard against a surface was coming up to speed.  Excpet that it is
|definately a vibration.  Ah well. As usual and of course, thank you very
|much for any information y'all might have.
|				-JBZImmerman!
|
|-- 
|___________           | "If there's anything around here more important
|     ||               | than my ego, I want it caught and shot now."-ZB
|||   ||acob Zimmerman!+> <zimerman@phoenix.Princeton.EDU> INTERNET 
|  ===                 |  <zimerman@PUCC>                  BITnet

Sounds to me like that's the degaussing coil in the monitor working.
It removes any residual magnetism in the monitor when you power it
up.  It's completely normal for it to be louder than the startup
chord you normally hear.  Try this: power up the montior and let it
warm up.  After about five minutes, press the degaussing button on
the back of the monitor (I believe it's the only other button
besides the power button.  Check the manual).  If it makes the same
sound, then the sound you hear at power-up is definitely the
deguassing coil and you shouldn't worry about it.

Barry Brown
pa1505@sdcc15.ucsd.edu
Technical Details
Message-ID: <833@sdcc15.ucsd.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!killer!ames!ucsd!sdcc6!sdcc19!sdcc15!pa1505
References: <5140@phoenix.Princeton.EDU>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!killer!ames!ucsd!sdcc6!sdcc19!sdcc15!pa1505
From: pa1505@sdcc15.ucsd.edu (Barry Brown)
Newsgroups: comp.sys.mac
Subject: Re: Monitor Noise...
Keywords: Help! Monitor vibration damage
Message-ID: <833@sdcc15.ucsd.edu>
Date: 5 Jan 89 09:00:59 GMT
References: <5140@phoenix.Princeton.EDU>
Sender: pa1505@sdcc15.ucsd.edu
Reply-To: pa1505@sdcc15.UUCP (Barry Brown)
Organization: University of California, San Diego
Lines: 36