Re: Mac SE shows no power, then does

Article View: comp.sys.mac

Article #37068

#37068

From: Harry Dodgson
Date: Wed, 01 Feb 1989 21:11

12 lines
921 bytes

Perhaps you have the same problem that I once had with mine.  For the
first few months, my SE would run for several minutes just fine and
then the power would drop for a second and the system would reset.
The correction for this was to (gasp) open the unit and reseat the
power connector to the logic board.  I hope that may help you.

-- 
Harry Dodgson Jr.               Internet:  dodgson@cs.wmich.edu
Western Michigan University
Computer Science Department        Voice:     (616) 387-5803
Kalamazoo, MI  49008

Technical Details

Message-ID: <422@cs.wmich.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wmich!wmu-cs!dodgson

References: <1170@sdcc7.ucsd.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wmich!wmu-cs!dodgson
From: dodgson@cs.wmich.edu (Harry Dodgson)
Newsgroups: comp.sys.mac
Subject: Re: Mac SE shows no power, then does
Summary: maybe the same problem.
Message-ID: <422@cs.wmich.edu>
Date: 1 Feb 89 21:11:29 GMT
References: <1170@sdcc7.ucsd.EDU>
Organization: Western Michigan Univ. CS Dept., Kalamazoo, MI
Lines: 12

Reply to Parent Message