🚀 go-pugleaf

In article <15036@cup.portal.com> drew@cup.portal.com (Andrew E Wade) writes:
>Does anyone know any good ways to link AppleTalk (Macintosh LAN) to
>EtherNet (e.g., Suns, etc., running with NFS, etc.)?  We use Macs
>for mktng, admin, finance, etc., but for sw development we use Suns
>and similar workstations.  Major problem is email; file transfer is
>also useful.
>
>There are three ways I know:  (1)  String a serial cable from each Mac to
>some Sun serial port.  Then, the Mac can use a terminal emulation program
>(we use Red Ryder) to log onto sun, then use mail, transfer files with
>xmodem or kermit or just ascii into vi, etc.  Works fine except for:
>need to string cables and availability of sun ports; mail arrival is
>not signaled to Mac user unless he explicitly brings up Red Ryder and
>checks.  Does anyone know of fix for this mail notification?  Maybe there's
>a little program that could run (desk accessory?) and periodically check
>mail?
>
>(2) NetSerial, a box which sits on AppleTalk, shared by all Mac's (one at
>a time), and acts like a serial port.  It can be connected to a Sun
>serial port, and then the Macs can log into Unix as remote terminal,
>just as in (1) above.  Advantage:  no need to string serial wires.
>Disadvantage:  Limited resource (only one Mac can use NetSerial at a time,
>so Mac user might have to wait in line to read/send email, which is a real
>pain!); same other problem as above:  no notification to Mac user of
>arrival of mail.
>
>(3) GatorBox and Kinetics boxes.  Expensive.  I haven't looked into them
>in detail or heard references.



  A better solution is a program called Liason. Besides providing dial in accessto a network, it also acts as a router; it bridges your ethernet and appletalk
networks. I fact , it will let you hook a network up to your printer port as  
well as your modem port. I have been using it for some time now with no 
problems.



				Mike



     _______________
    /  ___________  \
    | /           \ |
    | |   UPenn   | |
    | |    Mac    | | Administrator:          Mike Bell (bell@eniac)
    | |  Archives | |
    | \___________/ |  To access the Mac archives, issue the command:
    |       ______  |           cd ~mac/new
    |  ,   |______| |  For a listing of all available files, read:
    | @             |            filelist.tx
    \_______________/   Send any questions/suggestions about the archives to:
    |               |
    \_______________/                        mac@eniac

*****  Above instructions are valid for PennNet use only...all others use FTP