Mac II fails to find scsi drive: Help!

Article View: comp.sys.mac

Article #39548

#39548

From: Michael Fischer
Date: Fri, 17 Mar 1989 19:05

23 lines
1509 bytes

My new Mac II is not finding the internal scsi drive (HD 40). This is
the second time this has happened. Only connections are interal hd40,
b/w monitor, 1/4 bit video, mouse, kb, 1 meg ram.

Worked fine the previous evening, using hypercard v1.02. On booting
hear a few `clunks', the light on the drive pulses yellow at about 3-4
hz, and the query icon comes on the screen asking for a disk. Sometimes
the scsi drive pulses the light again at this point. Booting from the
utilities disk, I run the HD setup program, which also fails to find
the drive, although a very short pulse is emited from the drive light,
maybe 1/20 second. I have reset the parameter ram [eg
COMMAND/SHIFT/OPTION Control Panel], disconnected the power altogether,
and unplugged all externals (mouse kb monitor), and drained the
capacitors.  Still persists. I sent it off to the distributer the first
time, they claimed it booted normally on arrival on service report,
although my conversation with them suggested they ran HD Setup.  Any
ideas? 

Thanks...

Michael Fischer

mf1@ukc.ac.uk@ACUK.bitnet

Technical Details

Message-ID: <454@harrier.ukc.ac.uk>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcvax!ukc!harrier.ukc.ac.uk!mf1

References: <76@harrier.ukc.ac.uk>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcvax!ukc!harrier.ukc.ac.uk!mf1
From: mf1@ukc.ac.uk (Michael Fischer)
Newsgroups: comp.sys.mac
Subject: Mac II fails to find scsi drive: Help!
Message-ID: <454@harrier.ukc.ac.uk>
Date: 17 Mar 89 19:05:04 GMT
References: <76@harrier.ukc.ac.uk>
Reply-To: mf1@ukc.ac.uk (Michael Fischer)
Organization: Social Anthropology (CSAC), University of Kent at Canterbury, UK.
Lines: 23

Reply to Parent Message