🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.mac
Article #40713

Softstep memory upgrade

#40713
From: Charles Neil
Date: Wed, 12 Apr 1989 03:27
18 lines
1299 bytes
I just installed a Softstept IV memory upgrade in my Mac Plus, 
and since there have been inquiries about products like this, I
decided to post the results.  I had 4 spare 256K SIMMs that came
out of a Mac II, and the Softstep IV upgrade has no memory on it;
you combine the existing Mac Plus or SE SIMMs with the extra 
SIMMs to come up with a total of 2 Megs.  The kit consists of 4
boards with that accept 2 256K SIMMs each and plug back into the
Mac's memory slots.  Installation was fairly easy--getting the
power plug off the Mac's motherboard was the hardest part--and
the instructions were clear and easy to follow.  I was fearful about
heat and the power supply--the machine began life as a 512K unenhanced 
Fat Mac--so I also installed a muffin fan behind the handle. 
Everything seems just fine, and it sure is nice to have multifinder
on my "little" machine.
-- 
 
Charlie Neil (chn@lanl.gov)
Los Alamos National Laboratory (505) 665-0978
Technical Details
Message-ID: <864@a.lanl.gov>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!hc!lanl!a!chn

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!hc!lanl!a!chn
From: chn@a.lanl.gov (Charles Neil)
Newsgroups: comp.sys.mac
Subject: Softstep memory upgrade
Keywords: my experience
Message-ID: <864@a.lanl.gov>
Date: 12 Apr 89 03:27:28 GMT
Distribution: usa
Organization: Los Alamos National Laboratory
Lines: 18