🚀 go-pugleaf

		Help, Help, Help......
	
	A colleague of mine has been having problems with MicroSoft Works
Xmodem uploads. I have described the problem below. Any comments about solving
these problems would be willingly accepted. 

Problem Description: Xmodem facility in Microsoft Works ( MAC ) will not upload.
====================

		Investigative tests carried out.

1/ Attempt to upload and download using Microsoft Works to other systems
   using Xmodem.

2/ Perform same tests as above on an IBM PC version of Microsoft Works.

			IN DETAIL.

	The Xmodem facility in MS Works demonstrates a consistent and repeatable
failure when attempting to upload to a remote system.  We have tried to upload
to our in house  system and a number of bulletin booards.  In all attempts
the upload fails at the commencement of the FIRST block transfer.  When the
MAC receives  the first NAK from the remote  system,  it correctly responds
with  the block  number and its compliment.  Then after  transmitting  one
character  the failure  surfaces.  See below for a blow by blow description.

       This failure occurrs regardless of mode, eg text, data or binary.

NOTE, MS works on the MAC will DOWNLOAD successfully! ( curious ).

We repeated the transfer tests on IBM PC with Microsoft Works. XModem uploads
from the PC to a remote host were consistently successful. An obvious conclusion
is that this problem is peculiar to the MAC/WORKS combination.


================================================================================
MAC/WORKS xmodem upload to inhouse system. (via modem)

++++++++  Wed Apr  5 10:56:09 1989
XMODEM Version 3.6
Command line: xmodem -rbdx junk
Line speed = 2400 bits per second
----
XMODEM File Receive Function
DEBUG: sendbyte 15h
DEBUG: sendbyte 15h
DEBUG: sendbyte 15h
DEBUG: sendbyte 15h
DEBUG: sendbyte 15h
DEBUG: readbyte 01h
DEBUG: readbyte 01h
DEBUG: readbyte feh
DEBUG: packet 0 started
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 3 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
Timeout while reading sector 1
DEBUG: sendbyte 15h
DEBUG: readbyte 01h
DEBUG: readbyte 01h
DEBUG: readbyte feh
DEBUG: packet 0 started
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 3 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
Timeout while reading sector 1
DEBUG: sendbyte 15h
DEBUG: readbyte 01h
DEBUG: readbyte 01h
DEBUG: readbyte feh
DEBUG: packet 0 started
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 3 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
Timeout while reading sector 1
DEBUG: sendbyte 15h
DEBUG: readbyte 01h
DEBUG: readbyte 01h
DEBUG: readbyte feh
DEBUG: packet 0 started
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 3 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 2 characters
DEBUG: napping for 375 ms
DEBUG: readbuf--read 1 characters
DEBUG: napping for 375 ms
Timeout while reading sector 1
DEBUG: sendbyte 15h
DEBUG: readbyte 18h
DEBUG: readbyte 18h
Fatal error reception cancelled by remote.



Paul Zemancheff		      PHONE: +61 3 487 9271    FAX: +61 3 484 0878
CSIRO Division of	      ACSNET or CSNET: paz@mimir.dmt.oz
Manufacturing Technology,     ARPA: paz%mimir.dmt.oz@uunet.uu.net
Melbourne, Australia.	      UUCP: {uunet,ukc,mcvax}!munnari!mimir.dmt.oz!paz