Article View: comp.sys.mac
Article #411785V adjust info wanted
From: Teriann Wakeman
Date: Thu, 20 Apr 1989 17:06
Date: Thu, 20 Apr 1989 17:06
9 lines
838 bytes
838 bytes
I would like to check/adjust the 5V supply on my Mac+. There is a cable from the middle of the analogue board to the middle of the digital board. The soldered ends of the pins are readilly accessable on the underside of the digital board. I assume this cable carrys 5V to the digital board. Can anyone tell me which pin carrys the 5V? Or if there is a better place to measure the 5V?????Is the correct voltage 5.0? TeriAnn twakeman@hpcea.ce.hp.com
Technical Details
Message-ID:
<430099@hpcea.CE.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!hpda!hpcuhb!hp-ses!hpcea!twakemanShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!hpda!hpcuhb!hp-ses!hpcea!twakeman From: twakeman@hpcea.CE.HP.COM (Teriann Wakeman) Newsgroups: comp.sys.mac Subject: 5V adjust info wanted Message-ID: <430099@hpcea.CE.HP.COM> Date: 20 Apr 89 17:06:16 GMT Organization: HP Corporate Engineering - Palo Alto, CA Lines: 9