Article View: comp.sys.mac
Article #42840Re: MacDraw II bug with Page Setup
From: Steve Miller
Date: Fri, 19 May 1989 22:00
Date: Fri, 19 May 1989 22:00
17 lines
944 bytes
944 bytes
Brian Gould writes:
>In MacDraw, when you reduce the page, you can continue to use the remaining
>space for other things (like borders). But in Draw II, you never see the
>blank area of the page except on the printed copy.
>Bug?
Probably not. Whenever you change the size of a page or the reduction
factor you have to do a drawing size command to adjust MacDraw II's drawing
area. It doesn't automatically adjust the drawing area like MacDraw does.
-Steven Miller
Vancouver Division
Hewlett Packard
Technical Details
Message-ID:
<780007@hpvcfs1.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!hplabs!hp-pcd!hpvcfs1!stevemReferences:
<May.18.22.44.49.1989.12296@pilot.njin.net>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!hplabs!hp-pcd!hpvcfs1!stevem From: stevem@hpvcfs1.HP.COM (Steve Miller) Newsgroups: comp.sys.mac Subject: Re: MacDraw II bug with Page Setup Message-ID: <780007@hpvcfs1.HP.COM> Date: 19 May 89 22:00:32 GMT References: <May.18.22.44.49.1989.12296@pilot.njin.net> Organization: Hewlett Packard, Vancouver, WA Lines: 17