🚀 go-pugleaf

In article <780003@hpvcfs1.HP.COM> neff@hpvcfs1.HP.COM (Dave Neff) writes:
> [...]  The DeskJet is not IO limitted at 19.2K baud
>but the DeskJet+ is IO limitted.  In fact, on a DeskJet using 9600 and
>19.2K baud makes little difference but on a DeskJet+ this makes a big
>difference (2X).  If your DeskJet driver uses our data compaction modes a page
>of 300DPI graphics will typically be about 200K (sometimes more, sometimes
>less).  At 19.2 K baud this is about 2K per seconds so it should take
>100 seconds to print on a DeskJet+. [...]

OK. I am just about ready to get a DeskJet to play with (might be a good
printer for some clients). The big question is: Do any of the drivers out
there work well with a serial/parallel converter? I can't see why not, but
they might not make use of the higher speed (depends on how fast they can
build the page). I'd like to use MacPrint with a parallel cable, if it will
work well. I've got a Mac II with a cache, so there's plenty of CPU for the
driver to use. I primarily print text, but some of my clients do a lot of
graphics and page layout.

I guess none of this will matter in another nine months. System 7 will make
these kinds of printers much more attractive to the masses.

---
Alexis Rosen
alexis@ccnysci.{uucp,bitnet}
alexis@rascal.ics.utexas.edu  (last resort)