Article View: comp.sys.mac
Article #42961Re: My Mac is "fuzzing"!
From: Tony Jacobs
Date: Wed, 24 May 1989 05:03
Date: Wed, 24 May 1989 05:03
17 lines
1210 bytes
1210 bytes
In article <2260@thor.acc.stolaf.edu> sobiloff@thor.stolaf.edu (Blake Sobiloff) writes: >OK, here's the situation: Within the past two months my Mac will occasionally >start "fuzzing" the pixels on the screen. I mean that everything starts jumping > >What is the next step? Is this indicative of something major about to go wrong, Fuzzing is a sign that the connectors that go from the analog board to the monitor yoke are not making good contact. It may also be a sign that you have a cold soldier. The connectors for those same plugs are likely sources. Try cleaning the pins on the connector (both male & female sides). If that doesn't do it you can try resoldiering some of the pins on that same connector. -- Tony Jacobs * Center for Engineering Design * UofU * t-jacobs@wasatch.utah.edu
Technical Details
Message-ID:
<1898@wasatch.utah.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!wasatch!t-jacobsReferences:
<2260@thor.acc.stolaf.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!wasatch!t-jacobs From: t-jacobs@wasatch.utah.edu (Tony Jacobs) Newsgroups: comp.sys.mac Subject: Re: My Mac is "fuzzing"! Message-ID: <1898@wasatch.utah.edu> Date: 24 May 89 05:03:37 GMT References: <2260@thor.acc.stolaf.edu> Distribution: usa Organization: University of Utah, College of Engineering Lines: 16