🚀 go-pugleaf

In article <34663@apple.Apple.COM> dwells@Apple.COM (Dave Wells) writes:
>In article <993@mrsvr.UUCP> hallett@gemed.ge.com (Jeff Hallett x4-6328) writes:
>>Ok, this I really gotta know.  Where does one obtain an X-10
>>controller that has hookups and programming software for the
>>Macintosh?  I realize that the indvidual modules are easily accessible
>>from MANY places (Dak, Mainline, Radio Shack), but I have yet to see
>>an X-10 unit and the Mac configuration software.
>
>I'm curious to know what you meant by "Mac configuration software."  If
>you have some interesting application involving remote power control, give
>the Mactivator people a call.  They were working on several projects when
>I last talked to them. (several months ago) 

The software to which I refer is used on the Macintosh to allow a user
to configure the X10 controller.  A long time ago, I saw a one-time
advertisement for a company who sold an X10 controller that could be
hooked up to the serial port of a Macintosh Plus.  Software ran on the
Mac that allowed the user to program the X10 using a nice interface.
The software could then be quit and the Mac powered down, leaving the
controller to execute the newly-downloaded event configuration.

This seemed like a really optimal setup for anyone serious about using
the X10 automated controllers.

Also in Dave's response, he mentions Fry's as a place that sell X10
the X10 controller.   Does anyone have an address for this place?
What kind of dealer is this?  Any additional information is
appreciated.

Thanks

--
                Jeffrey A. Hallett, PET Software Engineering
                    GE Medical Systems, W641, PO Box 414
                            Milwaukee, WI  53201
          (414) 548-5163 : EMAIL -  hallett@positron.med.ge.com