Imagewriter at 19,200 baud

Article View: comp.sys.mac

Article #44980

#44980

From: barry
Date: Sun, 07 Jan 1990 21:00

17 lines
1362 bytes

I have an Epson FX/80 that I converted to be ImageWriter I compatible by
installing a Hanzon Universal Interface.  This board supports serial
communications at 19,200 baud.  However, the Mac Imagewriter driver only
allows 9,600 baud because the Imagewriter only supports rates up to
9,600 baud.  Is there any way I can patch the Imagewriter Chooser file
to use 19,200? I inspected the Imagewriter file with ResEdit, but
couldn't find any resources that related to the printer port. 

Thanks, Barry
------------------------------------------------------------------------
Barry Wolman                      | barry@s66.prime.com
Principal Technical Consultant    | 500 Old Connecticut Path
Prime Computer                    | Framingham, MA 01701
                                  | 508/879-2960, ext. 4187
------------------------------------------------------------------------
Nothing in this posting reflects an official position of Prime Computer.

Technical Details

Message-ID: <160700080@eriador>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!bloom-beacon!primerd!eriador!barry

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!bloom-beacon!primerd!eriador!barry
From: barry@eriador.prime.com
Newsgroups: comp.sys.mac
Subject: Imagewriter at 19,200 baud
Message-ID: <160700080@eriador>
Date: 7 Jan 90 21:00:00 GMT
Lines: 17
Nf-ID: #N:eriador:160700080:000:953
Nf-From: eriador.prime.com!barry    Jan  7 16:00:00 1990