Article View: comp.sys.mac
Article #45303Homebrew SCSI
From: Jerry Callen
Date: Fri, 12 Jan 1990 05:53
Date: Fri, 12 Jan 1990 05:53
16 lines
1105 bytes
1105 bytes
. I recently acquired a Seagate ST277N that I want to attach to my Mac. My major problem is cabling; I need a cable to adapt the 50 pin header on the drive to a standard female SCSI connector. I can then use the usual SCSI cables to go between the Mac and the female SCSI connector. Can anyone recommend a source for such cables? I've looked in the current Digikey/Jameco/JDR catalogs without success. BTW, I'm planning to use a Jameco case/power supply; does anyone have a better/cheaper option? Finally, I'm planning to use SF&I to drive this beast; has anyone set up resource templates that I could snarf? BTW, I'm attaching this thing to a Plus. -- Jerry Callen jcallen@encore.com
Technical Details
Message-ID:
<10850@encore.Encore.COM>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!sunic!uupsi!nyser!rpi!zaphod.mps.ohio-state.edu!usc!snorkelwacker!paperboy!husc6!encore!jcallenShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!sunic!uupsi!nyser!rpi!zaphod.mps.ohio-state.edu!usc!snorkelwacker!paperboy!husc6!encore!jcallen From: jcallen@Encore.COM (Jerry Callen) Newsgroups: comp.sys.mac Subject: Homebrew SCSI Message-ID: <10850@encore.Encore.COM> Date: 12 Jan 90 05:53:23 GMT Reply-To: jcallen@encore.UUCP (Jerry Callen) Organization: Encore Computer Corp, Marlboro, MA Lines: 16