Mac Monitor

Article View: comp.sys.mac

Article #46486

#46486

From: Walter Eppenstein
Date: Mon, 19 Feb 1990 01:15

16 lines
1164 bytes

Hey does anyone know offhand what the commands are fot the debugger that's
called up when you hit the interrupt switch on the side of the machine.
I figured out some from the MacsBug command listing.
(e.g. DM dump memory
	SM change memory
	G Execute at adress
	Dx,Ax,SR Display register x value
)
	Are there any other commadsd or is this all?
	Also where is the debugger stored? in ROM or in system software?
	And how can I substitue my own program in the interrupt service
routine (e.g. get my own routines to run when interrupt is pressed?)

Any reply would be appreciated...

						gregor@pawl.rpi.edu

Technical Details

Message-ID: <FF##6M%@rpi.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!rpi!gregor

References: <1990Feb10.233412.15585@mathrt0.math.chalmers.se> <5221@ur-cc.UUCP> <132009@sun.Eng.Sun.COM>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.mac
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!rpi!gregor
From: gregor@pawl.rpi.edu (Walter Eppenstein)
Subject: Mac Monitor
Message-ID: <FF##6M%@rpi.edu>
Sender: gregor@pawl.rpi.edu
Keywords: debugger, monitor 
Summary: Anyone know the built in debugger commands?
Organization: Rensselaer Polytechnic Institute, Troy NY
References: <1990Feb10.233412.15585@mathrt0.math.chalmers.se> <5221@ur-cc.UUCP> <132009@sun.Eng.Sun.COM>
Date: 19 Feb 90 01:15:30 GMT
Lines: 17

Reply to Parent Message