Article View: comp.sys.mac
Article #46488<None>
From: Walter Eppenstein
Date: Mon, 19 Feb 1990 01:29
Date: Mon, 19 Feb 1990 01:29
26 lines
1310 bytes
1310 bytes
Subject:Mac Monitor Message-ID: <FF##6M%@rpi.edu> Sender:gregor@pawl.rpi.edu Keywords: debugger, monitor Summary:Anyone know the built in debugger commands? Organization: Rensselaer Polytechnic Institute, Troy NY References: <1990Feb10.233412.15585@mathrt0.math.chalmers.se> <5221@ur-cc.UUCP> <132009@sun.Eng.Sun.COM> Date: 19 Feb 90 01:15:30 GMT Lines: 17 Hey does anyone know offhand what the commands are fot the debugger that's called up when you hit the interrupt switch on the side of the machine. I figured out some from the MacsBug command listing. (e.g. DM dump memory SM change memory G Execute at adress Dx,Ax,SR Display register x value ) Are there any other commadsd or is this all? Also where is the debugger stored? in ROM or in system software? And how can I substitue my own program in the interrupt service routine (e.g. get my own routines to run when interrupt is pressed?) Any reply would be appreciated... gregor@pawl.rpi.edu
Technical Details
Message-ID:
<190.25def78b@ceres.physics.uiowa.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!usc!cs.utexas.edu!uunet!dino!ceres!zaphod.mps.ohio-state.edu!rpi!gregorShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!usc!cs.utexas.edu!uunet!dino!ceres!zaphod.mps.ohio-state.edu!rpi!gregor From: gregor@pawl.rpi.edu (Walter Eppenstein) Newsgroups: comp.sys.mac Subject: <None> Message-ID: <190.25def78b@ceres.physics.uiowa.edu> Date: 19 Feb 90 01:29:15 GMT Lines: 26