Article View: comp.sys.mac
Article #4711Re: Macknowledge term software: how good is it?
From: Leonard Rosenthol
Date: Sun, 17 Sep 1989 18:52
Date: Sun, 17 Sep 1989 18:52
18 lines
1449 bytes
1449 bytes
In article <22178@cup.portal.com> LaserMan@cup.portal.com (Bob LaserMan Murrow) writes: >Macknowledge... I programed in TAL and wrote a Point and Click interface for >Portal. It achieved 14KBaud with a TeleBit TrailBlazer 19.2 modem. I would >recheck the 4800 baud max you got. It may be how you were set up. >Bob If I misled anyone as to the general speed of Macknowledge, let me apologize, what I meant to say (and thought I did) was that the TEXT THROUGHPUT on the terminal screen maxes out at about 4800 baud, though some of the xfers can take place as high as 12-13Kb (on a 19.2 connection). Also remember that the only standard(!) protocol that Mac/Acknowledge supports is XMODEM... -- +--------------------------------------------------+ Leonard Rosenthol | GEnie : MACgician Lazerware, inc. | MacNet: MACgician UUCP: svc@well.UUCP | ALink : D0025
Technical Details
Message-ID:
<13679@well.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!rutgers!netsys!lamc!well!svcReferences:
<1989Sep12.003227.7169@NCoast.ORG> <13584@well.UUCP> <22178@cup.portal.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!rutgers!netsys!lamc!well!svc From: svc@well.UUCP (Leonard Rosenthol) Newsgroups: comp.sys.mac Subject: Re: Macknowledge term software: how good is it? Summary: For xfers maybe, but not text! Message-ID: <13679@well.UUCP> Date: 17 Sep 89 18:52:02 GMT References: <1989Sep12.003227.7169@NCoast.ORG> <13584@well.UUCP> <22178@cup.portal.com> Reply-To: svc@well.UUCP (Leonard Rosenthol) Distribution: usa Organization: Whole Earth 'Lectronic Link, Sausalito, CA Lines: 18