SCSI device calls example needed!

Article View: comp.sys.mac

Article #4741

#4741

From: Phil Hunt
Date: Mon, 18 Sep 1989 17:33

23 lines
1466 bytes

Hi everyone,

	I am currently trying to write an INIT to send a SCSI Start command to a
hard disk here at work that requires it (It cannot be disabled, I tried, so
I will have to be content to start the drive when the system starts up).

	I am having absolutely no luck getting this right.  Does anyone have
any source that shows how to send a command (this command would be nice) to 
a drive through all the SCSI phases?

	There was a program called SCSI that came across the network awhile
back that show exactly what happens at each phase of the SCSI protocol, but
source wasn't included.....

	Any help would be appreciated...Thanks all!

==================================================================
Phil Hunt                      "Wherever you go, there you are!!!"
Digital Equipment Corporation                 Phone: (508)486-2164 
ENET:        VAXPHW::PHIL
USENET:      phil@vaxphw.enet.dec.com
MOREUSENET:  phil%vaxphw.dec@decwrl.enet.dec.com
EVENMORE:    ....!decwrl!dec-vaxphw!phil

Technical Details

Message-ID: <4796@shlump.nac.dec.com>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!haven!decuac!shlump.nac.dec.com!vaxphw.enet.dec.com

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!haven!decuac!shlump.nac.dec.com!vaxphw.enet.dec.com
From: phil@vaxphw.enet.dec.com (Phil Hunt)
Newsgroups: comp.sys.mac,comp.sys.mac.programmer
Subject: SCSI device calls example needed!
Message-ID: <4796@shlump.nac.dec.com>
Date: 18 Sep 89 17:33:03 GMT
Sender: news@shlump.nac.dec.com
Followup-To: comp.sys.mac
Organization: Digital Equipment Corporation
Lines: 23