Article View: comp.sys.mac
Article #4925Re: Static guards when installing DRAMs?
From: ISR group account
Date: Wed, 20 Sep 1989 20:51
Date: Wed, 20 Sep 1989 20:51
13 lines
1159 bytes
1159 bytes
Attach the clip on the Static wrist-thingie to the metal things sticking up around the edges of a mac II; on a plus/SE, to the metal bracket(s) at the rear of the board. You should also attach a wire from the same point you attached the static-band to a ground. (a cold water pipe or the ground hole in a grounded outlet) If you are wearing a shirt with long sleeves and those little plastic buttons at the end of the shirt, roll the sleeeves up, those buttons can carry a charge even if you are agrounded. -- Mike Schechter, Institute for Sensory Research, Syracuse Univ. isr@rodan.acs.syr.edu -or- msschech@rodan.syr.edu
Technical Details
Message-ID:
<787@rodan.acs.syr.edu>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!ukma!psuvax1!psuvm!cunyvm!nyser!rodan!isrReferences:
<5479@tank.uchicago.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!ukma!psuvax1!psuvm!cunyvm!nyser!rodan!isr From: isr@rodan.acs.syr.edu ( ISR group account) Newsgroups: comp.sys.mac Subject: Re: Static guards when installing DRAMs? Message-ID: <787@rodan.acs.syr.edu> Date: 20 Sep 89 20:51:53 GMT References: <5479@tank.uchicago.edu> Reply-To: isr@rodan.acs.syr.edu (Michael S. Schechter - ISR group account) Distribution: na Organization: Syracuse University, Syracuse, NY Lines: 12