🚀 go-pugleaf

Since last I posted about this problem, I've managed to get
an Adaptec ACB-4000 SCSI controller and an NEC 40 MB hard disk
formatted as a 43 MByte Mac SE hard disk after some serious
hacking, and with help from ephraim@think.com (thanks!).

Now the only trouble is that as well as this setup works as
a Mac drive, it is useless as a //gs drive. After properly
formatting it on the mac, I plug it into my Apple // SCSI
board, Rev C., which is in my //gs. The first attempt to
access the drive turns on the access light and leaves it
on for a very long time (>5 mins), then comes back claiming
the drive doesn't exist. Running the "HDFORMAT" program
(available from Applelink) results in a seek to track
0, then a "SCSI Error 27," which tells me nothing, except
that I've noticed that the ProDOS error #27 is "I/O error."

Is there some difference in the way the Apple // SCSI card accesses
a SCSI drive and the Mac SE accesses it? Obviously the directory
structures are totally different, but this trouble is obviously
occuring on a deeper level than that...

---------------------------------------------------------------------
Nick Sayer | ...{ lll-winken!cheers ucdavis!uop } !quack!mrapple
.... or.... cheers!quack!mrapple@apple.com or quack!mrapple@uop.edu
Packet radio: N6QQQ @ WB6V | FredMail: NSAYER@MADERA%NORCAL
Disclaimer: The BBC would like to appologise for that announcement