Article View: comp.sys.mac
Article #6683Mac (SE) --->> HP Laser
From: Patrik F{ltstr|m
Date: Thu, 19 Oct 1989 09:39
Date: Thu, 19 Oct 1989 09:39
17 lines
1160 bytes
1160 bytes
HP-laserJet. According to the manual of the printer, one must
run "System Configuration Program" (or something like that) on
the Mac to set the serial port correctly. Isn't that something
that the printerdriver should do? I do have the right cabels etc.
When I print something on the Mac, only deferred characters i written
by the printer (like the characters on a terminal with wrong speed,
or wrong nr of bits set), one sheet of paper is ejected and then
the printer looses the connection with the Mac (error nr 40 on the Jet).
Please reply by mail to me <paf@nada.kth.se> and I'll
will sum the responses here!
Patrik F{ltstr|m <paf@nada.kth.se>
Numerical Analysis and Computer Science
Royal Institute of Technology
Stockholm, Sweden
Technical Details
Message-ID:
<2110@draken.nada.kth.se>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!uunet!mcsun!sunic!draken!pafShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!uunet!mcsun!sunic!draken!paf
From: paf@nada.kth.se (Patrik F{ltstr|m)
Newsgroups: comp.sys.mac
Subject: Mac (SE) --->> HP Laser
Keywords: printer, laser, communication
Message-ID: <2110@draken.nada.kth.se>
Date: 19 Oct 89 09:39:33 GMT
Organization: Royal Institute Of Technology, Stockholm, Sweden
Lines: 17