🚀 go-pugleaf

In article <420007@hpbbm.HP.COM>, bwolf@hpbbm.HP.COM (Bryan Wolf) writes:
 
> There is no problem with using the Mac/HD on 50 Hz.  Get yourself an
> industrial grade, high-quality step-down transformer and you're all set.
> I thought about the power supply conversion/swap-out option but:

	what option?  were is that available?
	
> - expensive

	no doubt - unless you have "connections" or can beg/buy/steal
		   a broken European one and fix it.
	
> - hassle	( Germans in particular have no conception of
> 		  doing such a strange thing as swapping a power supply)

	hey.  I resent that.  All you have to do is ask here and I'll tell
	you in less than 10 lines what you have to do.

> - requires refitting before going back to the U.S.

	the beautiful part of a 220v PS is that it is 110 capable.
	all you have to do is to change a fuse and a jumper.  The
	nicest thing is that you can easily install a switch on the
	board as well as fuses and jumpers and toggle the setting from
	the outside.  presto - no hassle ever again (of course the SE
	beats that in convenience :-)

> The only disadvantage is that it somewhat limits the portability
> of the machine, since you also have to drag the transformer around.

	why?  you only need the transformer "there" and not "here".
	so why lug it anywhere?

> Incidentally, ImageWriter also work just dandy here;

	make that IW-I, not IW-II !!

> LaserWriters are supposed to be a problem on the 50 Hz freq.

	not at the University of Goettingen and several other places
	I know of ...

> Good luck;  if I can provide any additional info let me know.

	yep, did you find a good/cheap source for the transformer
	in Krautland (hey, I may say so:  I carry the passport)
	or the US?
-- 
--------------------------> please send REPLIES to <------------------------
INTERNET:    uhrig@mcc.com     (if unavailable: werner@rascal.ics.utexas.edu)
UUCP:     ...<well-connected-site>!milano!werner
ALTERNATIVE:   werner@astro.as.utexas.edu   OR    werner@utastro.UUCP