🚀 go-pugleaf

In article <14586@ut-emx.UUCP> nghiem@walt.cc.utexas.edu (Alex Nghiem) writes:
>[question about why MacKermit seems slow during file transfer at 9600 baud]
>
>You need to change your send and receive packet size to 1000 and set
>your block check type to 3 (CRC) to ensure 99.9% error correction. If
>you use the default settings, your packet size will be only 94 bytes.
>You will lose throughput because of the overhead needed to calculate
>a checksum for each of the 94 byte blocks.

You don't need to set block check to 3 (it can stay at 1) to use long
packets in Kermit.  Setting it to 3 actually slows the transfer rate.
To use long packets, you'll need version 0.9(40) of MacKermit and at
preferably edit history (70) of C Kermit on your Unix machine...

 

Mark B. Johnson                                            AppleLink: mjohnson
Developer Technical Support                         domain: mjohnson@Apple.com
Apple Computer, Inc.         UUCP:  {amdahl,decwrl,sun,unisoft}!apple!mjohnson

"You gave your life to become the person you are right now.  Was it worth it?"
                                                         - Richard Bach, _One_