Re: Simms from Technology Works

Article View: comp.sys.mac

Article #7973

#7973

From: Dr. Jim Sasaki
Date: Thu, 16 Nov 1989 21:01

20 lines
1470 bytes

In article <5304@uhccux.uhcc.hawaii.edu> tom@kahuna.UUCP (Tom Craven) writes:

> "torx screwdriver".  It turned out to be a 50 cent allen wrench.  It won't
> remove screws if they are tight since it lacks a torx head to fit the 
> screws....

Hmm.  You must have a lot of torque on those screws.  It only took me a few
seconds to unscrew my Mac's case, and I certainly don't have arms of steel. 
Didn't have any problems fitting the end of the scredriver/wrench/whatever into
the hole in the top of the screw.

>Comment: I thought that they once advertised a spreader as well, but maybe
>that was someone else.

Definitely someone else.  All in all, I found Tech. Works completely
satisfying.  If I had to get more memory, I wouldn't hesitate to call them
again.  Now if I could just find a ramdisk program that's compatible with all
my software, I'd be in heaven.

    -- Jim Sasaki (sasaki@umbc3.umbc.edu)

Technical Details

Message-ID: <2530@umbc3.UMBC.EDU>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!att!rutgers!ucsd!usc!samsung!aplcen!haven!umbc3!sasaki

References: <73541@yale-celray.yale.UUCP> <11217@phoenix.Princeton.EDU> <5304@uhccux.uhcc.hawaii.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!att!rutgers!ucsd!usc!samsung!aplcen!haven!umbc3!sasaki
From: sasaki@umbc3.UMBC.EDU (Dr. Jim Sasaki )
Newsgroups: comp.sys.mac
Subject: Re: Simms from Technology Works
Keywords: memory, torx
Message-ID: <2530@umbc3.UMBC.EDU>
Date: 16 Nov 89 21:01:11 GMT
References: <73541@yale-celray.yale.UUCP> <11217@phoenix.Princeton.EDU> <5304@uhccux.uhcc.hawaii.edu>
Reply-To: sasaki@umbc3.umbc.edu.UMBC.EDU (Dr. Jim Sasaki (CMSC))
Distribution: na
Organization: University of Maryland, Baltimore County
Lines: 20

Reply to Parent Message