Re: Hardware handshaking on M

Article View: comp.sys.mac

Article #8150

#8150

From: COLIN SAMPALEANU
Date: Mon, 20 Nov 1989 05:58

16 lines
1120 bytes

This is actually Adrian Sampaleanu. Just using my brother's account to 
be able to post on this net, where a wider audience might be able to 
help me.

Could anyone out there give me a definite answer to the questions: Can
the MAC support hardware handshaking through the CTS/RTS lines? Does 
the serial port even provide for these signals? If it can't be done, 
what is the hardware handshaking option in Zterm to be used for? I would
like to use hdwe handshaking with an ATI etc/e for MNP 5 flow control.
If this is possible, could you post the pin connections for a serial 
cable. The only ones I've seen haven't let me do this type of 
handshaking. Thanks in advance to anyone who can provide some answers.

                    Adrian
---
 * Via ProDoor 3.1R

Technical Details

Message-ID: <89112004371671@masnet.uucp>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!tmsoft!masnet!canremote!colin.sampaleanu

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!tmsoft!masnet!canremote!colin.sampaleanu
From: colin.sampaleanu@canremote.uucp (COLIN SAMPALEANU)
Newsgroups: comp.sys.mac
Subject: Re: Hardware handshaking on M
Message-ID: <89112004371671@masnet.uucp>
Date: 20 Nov 89 05:58:00 GMT
Organization: Canada Remote Systems Limited, Mississauga, ON, Canada
Lines: 16