Re: Experiences with Orange Micro Grappler? (was Re: Mac Printers)

Article View: comp.sys.mac

Article #9046

#9046

From: Scott Paisley
Date: Thu, 07 Dec 1989 13:32

18 lines
1386 bytes

In article <1989Dec7.050544.1498@ncsuvx.ncsu.edu> dks@shumv1.uucp (D. K. Smith) writes:

>  Any netters out there have any experiences with Orange Micro's
>  Grappler Products for interfacing other printers (namely parallel
>  24 pin dot-matrix and laser) to the Mac?

I have some questions on this subject as well.  My dad has a parallel
Epson-1500.  What is the best way to get it hooked up to the mac?
Would it be advantages to convert the epson into a serial device?  I
know that converting the epson to serial is trivial, it just takes a
couple of extra dollars.

Thanks in advance.
--
"Don't be too proud of this technological terror you've constructed.  The 
ability to destroy a planet is insignificant next to the power of the Force."

Scott Paisley        paisley@cme.nbs.gov        ..!uunet!cme-durer!paisley

Technical Details

Message-ID: <PAISLEY.89Dec7083250@lobotomy.cme.nist.gov>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cme!durer!paisley

References: <1989Dec7.050544.1498@ncsuvx.ncsu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cme!durer!paisley
From: paisley@cme.nist.gov (Scott Paisley)
Newsgroups: comp.sys.mac
Subject: Re: Experiences with Orange Micro Grappler? (was Re: Mac Printers)
Message-ID: <PAISLEY.89Dec7083250@lobotomy.cme.nist.gov>
Date: 7 Dec 89 13:32:50 GMT
References: <1989Dec7.050544.1498@ncsuvx.ncsu.edu>
Sender: news@cme.nbs.gov
Organization: National Institute of Standards and Technology
Lines: 18
In-reply-to: dks@shumv1.uucp's message of 7 Dec 89 05:05:44 GMT

Reply to Parent Message