🚀 go-pugleaf

In article <6092@netnews.upenn.edu> hodas@eniac.seas.upenn.edu.UUCP (Josh Hodas) writes:
>In article <1030@osupyr.mast.ohio-state.edu> pgn@osupyr.mast.ohio-state.edu (Paul G. Nevai) writes:
>>
>>
>>This is what I did:
>>
>>I took apart my 800K drive, took out the drive unit itself, went to my dealer
[...]
>>thing in my Mac II. 
[...]
>>DOESN'T WORK!!!! How come? It wants to initialize every disk and then fails to do
[...]
>>Paul Nevai                                pgn@osupyr.mast.ohio-state.edu

}Well, the problem may be that some time before the SE and II came
}out they changed subtly the design of the drive.  I know this happened
}because I went to get an accelarated 512e fixed and they said that
}they could not swap the drive because the new drives required a new
}cable (different than the old pinout) and that they did not have that
}cable in a sufficiently long form to get around my accelarator
}(A custom long drive cable of the old style had come with the card).
}
}So if your drive is one of the older ones, and you are using a cable
}for the II (which is designed for the new drives) the pinouts are wrong.
}
}I know new drives will work in old systems given the proper cable.  I
}have no idea whether old drives can be made to work in newer systems.
}
}If you get an answer I'd love to hear as I have been considering the same
}process to give my II a new floppy.

All true, but it was a stupid excuse your dealer gave you.

My upgraded to 512ke internal drive failed. I got a replacement drive,
which didn't work, called my dealer, he said, "You must have an early
drive, the cable to the drive changed. Bring your cable in.".

I brought my cable in, the tech person took it into the back room, and
clipped one lead. The drive works fine. My memory of exactly what
he did to my cable may be wrong, i.e. he may have clipped two wires
or something, but the point is, it took 2 minutes for him to change,
and he returned my same cable to me.

I suppose I could always pull my case apart and find out 8^)
-- 
uucp:     {decwrl,uunet}!eda!jim        Jim Budler
internet: jim@eda.com                   EDA Systems, Inc.