🚀 go-pugleaf

In article <2519@phred.UUCP> jeffp@phred.UUCP (Jeff Parke) writes:
>I just tried unsucessfully to attach my old jasmine 20 meg hard drive to my
>new SE/30 SCSI port.  If I left the jasmine power off, the /30 just sat there.
>If I powered the jasmine up prior to turning on the /30, the /30 would get to
>the point of trying to find the jasmine, then freeze (with desktop partially
>drawn).  The jasmine drive was in fine shape, and so is the /30 SCSI port
>because it worked fine with a Daynafile drive I attached to it.

>Anyone else having this problem?  Any solutions?
>
If its starting to load the Finder or some part of the booting 
process chances are you have some INIT or something installed 
that does not like to work on an 030 system. If you boot
from a floppy and get the Hard disk to mount, you might want
to remove INIT's and perhaps debuggers to see if that solves the
problem. I installed a Radius accelerator in a Plus once with
a Jasmine 80 and it would not boot afterwards, and I found that
it was due to an older version of the Macsbug debugger that was
causing my problems...




-- 
Norm Goodger				SysOp - MacInfo BBS @415-795-8862
3Com Corp.				Co-Sysop FreeSoft RT - GEnie.
Enterprise Systems Division             (I disclaim anything and everything)