Re: PC-Masscomp Ethernet

Article View: comp.sys.masscomp

Article #107

#107

From: Mike Tankenson
Date: Tue, 09 Feb 1988 07:35

21 lines
1501 bytes

> We are thinking of connecting our PC-AT to our masscomps via ethernet.
> We currently have the 201 boards on the masscomps. If any of you
> have experience with making such a connection, I would appreciate any
> help, gotchas, or advice you might proffer.

We have experience with ATs running PC/NFS on a 3c501 board (highly
recommended).  We have also tested the Excelan TCP/IP package (h/w and s/w).
We haven't seen any (major) problems with either of these packages.

Note that you don't need NFS on your server (Masscomp) to use PC/NFS.  It is a
full blown TCP/IP implementation with TELNET, FTP, some 'R' commands, etc.
When you upgrade to RTU 4.0 (with NFS), you'll be able to share resources from
the file server to your ATs.  I believe the prices for Excelan and Sun PC/NFS
are very close.

--mike

Mike Tankenson                Telos/Jet Propulsion Laboratory - NASA
4800 Oak Grove Drive, Pasadena, CA.  91109            (818) 354-1447
Uucp: seismo!cit-vax!jplpro!mike
Arpa: jplpro!mike@cit-vax.ARPA -or- mike@jplpro.JPL.NASA.GOV

Technical Details

Message-ID: <3328@soma.bcm.tmc.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!burl!codas!killer!academ!soma!masscomp-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!burl!codas!killer!academ!soma!masscomp-request
From: mike@poe.jpl.nasa.gov (Mike Tankenson)
Newsgroups: comp.sys.masscomp
Subject: Re: PC-Masscomp Ethernet
Message-ID: <3328@soma.bcm.tmc.edu>
Date: 9 Feb 88 07:35:38 GMT
Sender: masscomp@soma.bcm.tmc.edu
Lines: 21
Approved: masscomp@soma.bcm.tmc.edu
In-Reply-To: Message from "Stan Barber, Moderator" of Jan 19, 88 at 11:31 pm
Status: RO