Article View: comp.sys.misc
Article #1078Re: Query about ADC mocem from DAK
From: scott
Date: Mon, 30 Mar 1987 19:58
Date: Mon, 30 Mar 1987 19:58
16 lines
1369 bytes
1369 bytes
About the ADC modem... I bought an ADC modem about a year and a half ago. It worked fine for about a month, then it kind of died. 300 baud still worked, but not 1200 baud. I sent it back, and they fixed it for free (1 year warranty). I then used it for over a year without any problems. Just a few days ago I used it again, and it didn't work! Again, it would not answer back to the modem on the other end, but both at 300/1200 baud. The modem has a transformer inside, so it gets hot. I reseated all the ICs, with no luck. After leaving it unplugged a day I tried it again, and it worked without any problems. I suspect that some of the parts are heat sensitive. I don't know if these problems are inherent in all ADC modems, but it is kind of questionable that my modem has exhibited two problems like this...
Technical Details
Message-ID:
<4560001@hpcvck.HP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!sri-unix!hplabs!hp-pcd!hpcvc0!hpcvck!scottReferences:
<6067@brl-adm.ARPA>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!sri-unix!hplabs!hp-pcd!hpcvc0!hpcvck!scott From: scott@hpcvck.UUCP Newsgroups: comp.sys.misc Subject: Re: Query about ADC mocem from DAK Message-ID: <4560001@hpcvck.HP> Date: Mon, 30-Mar-87 14:58:48 EST Article-I.D.: hpcvck.4560001 Posted: Mon Mar 30 14:58:48 1987 Date-Received: Fri, 3-Apr-87 01:09:04 EST References: <6067@brl-adm.ARPA> Organization: Hewlett-Packard Co., Corvallis, Oregon Lines: 16