Re: Altos 586 and V20

Article View: comp.sys.misc

Article #139

#139

From: Macy Hallock
Date: Tue, 15 Aug 1989 15:41

23 lines
1598 bytes

In article <4891@macom1.UUCP> larry@macom1.UUCP (Larry Taborek) writes:
>I have a Altos 586/40.  This machine has a 8086 CPU.  I have
>heard from several people that if you bought a V20 chip and
>plugged it in, the Altos would pick up some speed.

This was recently discussed on comp.sys.ibm.pc.
There are several machines using the 8086, most notably the AT&T 6300.
This is a true sixteen bit processor, using a 16 bit bus, as opposed to
the 8 bit bus of the 8088.

The NEC V20 := Intel 8088
The NEC V30 := Intel 8086

I do not know if the V20 chip is damaged by your use of it in an 8086
motherboard.  Give it to somone with a 10 mhz XT clone, let them find
out! :-)
       Macy Hallock               fmsystm!macy@NCoast.ORG
       F M Systems, Inc.          hal!ncoast!fmsystm!macy
       150 Highland Dr.           uunet!hal.cwru.edu!ncoast!fmsystm!macy
       Medina, OH 44256           Voice: 216-723-3000 X251  
       Disclaimer:                My advice is worth what you paid for it.
       Alt.disclaimer:            Your milage may vary.
       Biz.disclaimer:            My opinions are my own. What do I know?

Technical Details

Message-ID: <32@fmsystm.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!mailrus!cwjcc!hal!ncoast!fmsystm!macy

References: <4891@macom1.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!mailrus!cwjcc!hal!ncoast!fmsystm!macy
From: macy@fmsystm.UUCP (Macy Hallock)
Newsgroups: comp.sys.misc,comp.unix.xenix
Subject: Re: Altos 586 and V20
Keywords: Altos 586, V20
Message-ID: <32@fmsystm.UUCP>
Date: 15 Aug 89 15:41:47 GMT
References: <4891@macom1.UUCP>
Reply-To: macy@fmsystm.UUCP (Macy Hallock)
Distribution: usa
Organization: F M Systems  Medina, Ohio USA
Lines: 23

Reply to Parent Message