Article View: comp.sys.misc
Article #2019Re: 17B, 27S, 42S debugger
From: Bruce Stephens
Date: Mon, 27 Feb 1989 17:58
Date: Mon, 27 Feb 1989 17:58
26 lines
1380 bytes
1380 bytes
>I have played with the debugger in the 17B and 27S, and it seems that >the up-arrow/down-arrow keys do not produce the action described >above. All other keys (actually, key locations) used with the 42S >debugger do produce the same actions on the 17B and 27S. What am I >doing wrong? The up-arrow/down-arrow keys were an enhancement added after the 17B and 27S were released. >Also, does the decimal point key (when used in the debugger) make the >cpu start executing at the displayed address? Yes. >Thanks, >Bill Chiarchiaro Have fun with these features, but don't expect any support from HP--they are in there to help HP identify problems. As for "synthetic programming" on the HP-42S, don't get your hopes up. There are a lot more internal checks for bogus parameters on the HP-42S than on the HP-41C. This will preclude such great ideas as SF 103, RCL 117, etc. -- Bruce Stephens bruce%hp-pcd@hplabs.HP.COM
Technical Details
Message-ID:
<5120003@hpcvra.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!gatech!hubcap!ncrcae!ncr-sd!hp-sdd!hplabs!hp-pcd!hpcvra!bruceReferences:
<1273@xn.LL.MIT.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!gatech!hubcap!ncrcae!ncr-sd!hp-sdd!hplabs!hp-pcd!hpcvra!bruce From: bruce@hpcvra.HP.COM (Bruce Stephens) Newsgroups: comp.sys.misc Subject: Re: 17B, 27S, 42S debugger Message-ID: <5120003@hpcvra.HP.COM> Date: 27 Feb 89 17:58:36 GMT References: <1273@xn.LL.MIT.EDU> Organization: Hewlett-Packard Co., Corvallis, OR, USA Lines: 26