🚀 go-pugleaf

55srwlgs@SACEMNET.AF.MIL ("55SRWLGS") writes:


>	I have a 386 machine, with a 40 meg winchester and 
>two floppy drives. Drive a: is a 720K 3 1/2", while 
>drive b: is a 360K 5 1/4". We don't use drive a: much,
> since most of our floppies are 360K 5 1/4"-ers.
>	I can use ASSIGN in our MS-DOS 4.01 to make the 
>system think drive a: is b:, but this can't work with a 
>lot of programs, including the FORMAT command. Is there
>a TSR which will let me swap a: and b: for everything?
>I'm too lazy to open up the CPU, and it's too new to tinker
>with, just yet.

>Frank Starr
>55srwlgs@sacemnet.af.mil

The following is a short TSR program for the PC. It's called
TAB.COM and simply interchanges drive A: and B:; so after
loading it all accesses to A: go to B: and vice-versa.
Sorry for only posting the binary, but a don't have any
documentation for it.

BEGIN-----Cut here-----Cut here-----Cut here-----Cut here----
begin 666 tab.com
MZSJ0```````NB!8#`8#Z`'0(@/H!=`CK"Y"R`>L&D+(`ZP&04%6+[(M&"(=&
M`ETN_QX$`2Z*%@,!R@(`N!,US2$NB1X$`2Z,!@8!N!,EN@@!C,N.V\TA_+0&
ML``SR;I0&;<'5<T07;0",]*W`,T0N``QNA0`S2&X,`"+Z+H(`+@`N([`OMX#
MB_ZT'[#:J[#$B\WSJ["_JX'&H`"+_K"SJ[`@B\WSJ["SJTIUZX'&H`"+_K#`
MJ[#$B\WSJ[#9JXTVY@&_A@2X*P"+Z+H+`+0<+HH$JT9-=?,\!W0*N"L`B^B#
MQTKKY</)S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-
MS<W-N[H@("`@("`@("!405530TA!0B`@("`@($EN<W1A;&QI97)T("`@("`@
M(""ZS,W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-S<W-
MS;FZ("`@("`@("`@("`\/#P\/"`M+2TM+2TM+2`^/CX^/B`@("`@("`@("`@
MNKH@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@(""Z
MNB`@("#-S<W-S=O;V\W-S<W-("`@("`@("#-S<W-S=O;V\W-S<W-("`@(+JZ
M("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@("`@NLC-
JS<W-S<W-("`@($1/4R`M($EN=&5R;F%T:6]N86P@("`@S<W-S<W-S<V\
`
end
END-----Cut here-----Cut here-----Cut here-----Cut here-----C