Wang office system

Article View: comp.sys.misc

Article #817

#817

From: Benjamin Clifford
Date: Wed, 10 Dec 1986 01:14

10 lines
1156 bytes

Help!  I have been assigned the task of connecting a Wang wordprocessing
system (model OIS 1154) to   a Xerox PC with a null modem cable, but I
can't find the proper pinouts on the Wang.  It seems that the cable must
be attached to the Wang at a 25 hole female connector, which is the only
available connector I can find on the back of the
telecommunications-enabled terminal.  Does anyone out there know what
the pinouts are for Wang(s)?  They have a toll-free number but they say
that unless I have a service contract with them any call will cost me
$100....  Thanks a lot in advance.  Please send replies to
6081939@PUCC...

Technical Details

Message-ID: <1451@PUCC.BITNET>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!princeton!puvax2!6081939@PUCC.BITNET

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!princeton!puvax2!6081939@PUCC.BITNET
From: 6081939@PUCC.BITNET (Benjamin Clifford)
Newsgroups: comp.sys.misc
Subject: Wang office system
Message-ID: <1451@PUCC.BITNET>
Date: Tue, 9-Dec-86 20:14:11 EST
Article-I.D.: PUCC.1451
Posted: Tue Dec  9 20:14:11 1986
Date-Received: Wed, 10-Dec-86 04:44:48 EST
Reply-To: 6081939@PUCC.BITNET
Organization: Princeton University Computing Center, Princeton, New Jersey
Lines: 10