How to increase transfer speed in Kermit

Thread View: comp.sys.misc

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Chun-Ching Yang Sun, 26 Jul 1992 02:26

#29

Author: Chun-Ching Yang
Date: Sun, 26 Jul 1992 02:26

12 lines
1100 bytes

I just bought a 14,400 Modem. However, after trying to download the data from
the VAX in the university, I found the download speed from the mainframe to my
Mac was slow. The transfering speed was about 560 byts in each  TWO seconds. If
the high speed modem worked fine, then the transfer speed should be about
1,440  in ONE second. (Is that right?)
I have check the VAX and the modem there is 14,400. I don't expect that the
speed can  reach 1440 in a second but the speed I got was so slow. How come?

Can anyone help me solve this problem?


                                                        Yang

Re: How to increase transfer speed in Kermit

#30

Author: Colby Kraybill
Date: Sun, 26 Jul 1992 03:21

15 lines
805 bytes

You might want to ry increasing the size of the packets being transfered.

Set the packet sizes on your local machine to 1024, also set the packet length
to 1024 on the VAX at your school.  This is accomplished by issuing this
command in kermit.

set pack len 1024



-- 
Colby Kraybill
Space and Planetary Image Facility
University of New Mexico

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads