Article View: comp.sys.next.hardware
Article #1067sc: parity error
From: Thomas Tschannen
Date: Fri, 13 Nov 1992 13:41
Date: Fri, 13 Nov 1992 13:41
25 lines
1096 bytes
1096 bytes
I've got a 1GB-disk from DEC (model DSP3085).
There were no problems to get it running. But after two weeks or so I got
the msg
sc: parity error
at boot time (at the very begining).
The system is not able to access the disk nor to boot from the
internal disk as long the external drive is connected.
I've checked the drive on another host. But also there, same problem.
Current configuration:
NeXTcolorstation running NeXTStep 2.1
SCSI ID 0 external disk 1GB (DEC)
1 internal disk 400 MB
7 CPU
Switching the external disk to ID 2 and reboot doesn't help.
What could cause this error msg ?
Thanks,
Thomas.
Technical Details
Message-ID:
<1992Nov13.134140.18733@aragorn.unibe.ch>Path:
arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!rpi!ghost.dsi.unimi.it!univ-lyon1.fr!chx400!aragorn.unibe.ch!newsShow Full Headers
Complete Article Headers
Newsgroups: comp.sys.next.hardware Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!rpi!ghost.dsi.unimi.it!univ-lyon1.fr!chx400!aragorn.unibe.ch!news From: tt@panda.unibe.ch (Thomas Tschannen) Subject: sc: parity error Message-ID: <1992Nov13.134140.18733@aragorn.unibe.ch> Sender: news@aragorn.unibe.ch Reply-To: tschannen@phil.unibe.ch Organization: University of Berne, Switzerland Date: Fri, 13 Nov 1992 13:41:40 GMT Lines: 25