NCSA Telnet v. 2.3

Article View: comp.sys.next.hardware

Article #1076

Back to comp.sys.next.hardware Previous Next

#1076

From: Eric Schwartz
Date: Sat, 26 Sep 1992 08:10

18 lines
1186 bytes

I'm trying to hook up a PC XT with an EtherCard PLUS Elite (which includes
a WD8003 driver) to my NeXTstation.  So far I have version 2.3 of NCSA
Telnet installed on the PC, I am running the packet driver, and I have the
coax run from the NeXT to the PC, with terminators in place at each end.

I have no idea what the next step is.  What do I need to tell the NCSA
configuration file (CONFIG.TEL) so that it communicate with the NeXt,
and what should I tell the NeXT?  Do I need to reboot either/both of the
machines?

I've also heard that Sun's PC-NFS is another way to go with this setup,
though NCSA Telnet is all I could find for now.  If anyone can tell me
how to get my current setup working, then how to improve it or upgrade
it to something far superior, please let me know via e-mail.

Thanks,

Eric

Technical Details

Message-ID: <ESCHWART.92Sep26001031@netcom.Netcom.COM>

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!wupost!csus.edu!netcom.com!netcom!eschwart

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!usc!wupost!csus.edu!netcom.com!netcom!eschwart
From: eschwart@netcom.Netcom.COM (Eric Schwartz)
Subject: NCSA Telnet v. 2.3
Message-ID: <ESCHWART.92Sep26001031@netcom.Netcom.COM>
Date: Sat, 26 Sep 92 08:10:31 GMT
Organization: Netcom Online Communications Service
Distribution: comp
Lines: 18