Article View: comp.sys.next.hardware
Article #1087Re: Using a PC case for SCSI devices
From: Bjoern Kriews
Date: Sun, 27 Sep 1992 04:41
Date: Sun, 27 Sep 1992 04:41
19 lines
1211 bytes
1211 bytes
hickman@cse.unl.edu (Hubert B. Hickman) writes: >I recall a discussion some tim back about using PC cases as an >inexpensive case to hold SCSI devices. Did anyone who went this >route experience any difficulties? I would appreciate any experiences, >both good and bad. I recently purchased a nics black big-tower to put my tape drive in. I got a large one because I plan to add more disks and perhaps some 386 board as a terminalserver (we will see...) I worked a bit on the slots to make the SCSI connectors (50p. Centr.) fit and added a connector for daisy-chaining. I took a cable from friend (some old Sparc-Cable) and it works fine. I can't complain. regards, Bjoern -- bkr@drdhh.hanse.de - Bjoern Kriews - Stormsweg 6 - D-2000 Hamburg 76 - FRG
Technical Details
Message-ID:
<1992Sep27.044145.4791@drdhh.hanse.de>Path:
arc1-ca.pugleaf.net!sparky!uunet!olivea!spool.mu.edu!agate!doc.ic.ac.uk!uknet!mcsun!Germany.EU.net!news.Hamburg.Germany.EU.net!abqhh!drdhh!bkrReferences:
<1992Sep26.034836.27455@unlinfo.unl.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!spool.mu.edu!agate!doc.ic.ac.uk!uknet!mcsun!Germany.EU.net!news.Hamburg.Germany.EU.net!abqhh!drdhh!bkr From: bkr@drdhh.hanse.de (Bjoern Kriews) Newsgroups: comp.sys.next.hardware Subject: Re: Using a PC case for SCSI devices Message-ID: <1992Sep27.044145.4791@drdhh.hanse.de> Date: 27 Sep 92 04:41:45 GMT References: <1992Sep26.034836.27455@unlinfo.unl.edu> Organization: Digital Island Lines: 19