🚀 go-pugleaf

In article <1992Oct26.000324.4428@pilhuhn.ka.sub.org> hwr@pilhuhn.ka.sub.org  
(Heiko W.Rupp) writes:
> philip@utstat.uucp (Philip McDunnough) writes:
> 
> >>I've got a Neuron 1414 (don't laugh) and am need of upgrading the  
> >>roms...I've been told that ZyXel roms will work..
> 
> >In any case, they could help with the ROM version you'll need from ZyXEL (
> >probably 5.02), but best to contact them, and get their fax software. You'll
> 
> ZyXEL 5.02 ROMS do work in the Neuron (it may happen, that you have
> now to solder in two pins on the modem-board in oreder to enable 1MBit
> ROMs). But your Neuron software won't work with ZyXEL ROMs, as they
> ask the Modem if it is an Neuron or not - and ZyXEL ROMs definitively
> report, that they are not Neurons.
> 
> >A demo (version 1.02) of NXFax is on sonata.cc.purdue.edu and you can test  
it
> >with your current modem. There's an e-mail address in there.
> 
> If you are satisfied with the demo, you can fully enable it by getting
> a password from B&W.
> -- 
> Heiko W.Rupp  Gerwigstr.5  7500 Kh'e 1  hwr@pilhuhn.ka.sub.org  +49 721  
693642
> Advertisement for donkey rides in Thailand:  Would you like to ride
>         on your own ass?

I also have a Neuron 1414. The 1414 was simply a ZyXEL manufactured modem and  
then repackage by Neuron with some additional software thrown in. As far as I  
know there is no soldering required. I have for quite some time also used Craig  
Goss's NXFax and VERY STRONGLY RECCOMEEND IT. I agree entirely with what Philip  
McDunnough wrote in his posting.
Paul Goldstone
abekas!pnext!paul@lns.com
-- 
Paul Goldstone
abekas!pnext!paul@lns.com