🚀 go-pugleaf

In article <1992Oct4.020543.19784@drdhh.hanse.de> bkr@drdhh.hanse.de (Bjoern  
Kriews) writes:
> ray@astro.ocis.temple.edu (Ray Lauff) writes:
> >I have a 9600 speed modem connected to my NeXT which
> >works fine at 9600 but will not compress and run at 57,600
> >as the documentation states.  It seems to me that since I set
> >the port to 9600 in the /etc/ttys file that it can't send
> >data any faster.  As a result, when I transfer files I am
> >getting typical character per second rates of around 650 cps.
> 
> You can'r go above 9600 with old machines and not above 38400
> with new ones.

I'm running 57,600 on an '030 with Yrrid's TTYDSP!
> 
> Add the gettytab entries for 19200 and 38400, then use 38400
> in /etc/ttys. Be sure you have correct hardware flow control
> wiring.
> 
> I run my USR Courier that way and I get ~1690 cps with phys.
> 14400 and V42bis.
> 
> Regards, Bjoern
> -- 
> bkr@drdhh.hanse.de - Bjoern Kriews - Stormsweg 6 - D-2000 Hamburg 76 - FRG
> 
> 

No relation to Yrrid, except a (very) satisified customer!

Jim