🚀 go-pugleaf

In article <Mta=3D@engin.umich.edu> wjabi@libra.arch.umich.edu (Wassim M. Jabi)  
writes:
> Hi:
> I've been experiencing some trouble with my Fujitsu 520MB
> external.  It happens once or twice a week. I would hear the disk
> go "click, click" and then the console window will have these messages
> scrolling by. Many times an alert window would come up telling me
> to save documents before logging out. Any idea what is going on?
> 
> Messages:
> ------ cut here -----------------------------
> Target 0: HARDWARE ERROR; block 0H retry 1
> Target 0: NOT READY; retry 1
> Target 0: NOT READY; retry 2
>              .
>              .
>              .
> Target 0: NOT READY; retry 19
> sd0 (0,0): sense key:0x2  additional sense code: 0x4
>     SCSI Block in error = 0 (front porch)
> IO error on pagein: error = 5.
> Dec 30 15:00:18 Workspace: Controller exited.
> ------ cut here -----------------------------
> HELP!!!!!!
> --
> Wassim M. Jabi                            (313) 936-0229
> Doctoral Program in Architecture, University of Michigan
> 2000 Bonisteel Boulevard  Ann Arbor  Michigan 48105-2313
> wjabi@libra.arch.umich.edu             NeXTMail-friendly

This is a general problem with this disk!!! It happens when it gets too hot  
inside a slab. Last year I had a total data loss due to this problem.

--
Jochen Richter                              Phone +49-721-696922
Zahringerstrasse 57                         Fax   +49-721-696988
D-7500 Karlsruhe 1                          e-mail: jr@sade.ka.sub.org
Germany                                             jr@resy2.kfk.de