Re: Microphone for the Cube

Article View: comp.sys.next.hardware

Article #136

Back to comp.sys.next.hardware Previous Next

#136

From: Paul Verket
Date: Sun, 01 Nov 1992 06:02

17 lines
1253 bytes

In article <Bwy7Dv.8v5@knot.ccs.queensu.ca> dale@hecate.phy.queensu.ca (Dale  
Swanston) writes:
> 
> We have a second hand Cube here without a microphone.  I've tried using a  
> Macintosh microphone but it won't work.  Lip service does not record  
> anything at all.   Is there a special kind of mike required for this  
> machine?  The port is at the back of the display and the Mac mike plugs in  
> fine (I don't know the name of the connector but is the common audio type  
> connector). 

If you look at the Mac mike I think you'll find that even though it's a mono  
mike, it has a stereo plug. I suspect that it's drawing it's power from the  
Mac.

Try either an electret mike with an external power source or a dynamic mic.

Paul Verket (NeXTmail ok)

Technical Details

Message-ID: <1992Nov1.060206.28171@venice.sedd.trw.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!venice!news

References: <Bwy7Dv.8v5@knot.ccs.queensu.ca>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!usc!venice!news
From: verket@venice.sedd.trw.com (Paul Verket)
Subject: Re: Microphone for the Cube
Message-ID: <1992Nov1.060206.28171@venice.sedd.trw.com>
Sender: news@venice.sedd.trw.com (USENET News)
Nntp-Posting-Host: slipin2.sedd.trw.com
Organization: TRW Systems Engineering & Development Division, Carson, CA
References: <Bwy7Dv.8v5@knot.ccs.queensu.ca>
Date: Sun, 1 Nov 1992 06:02:06 GMT
Lines: 17

Reply to Parent Message