🚀 go-pugleaf

>This is a general problem with this disk!!! It happens when it gets too  
hot  
>inside a slab. Last year I had a total data loss due to this problem.
>
>--
>Jochen Richter                              Phone +49-721-696922
>Zahringerstrasse 57                         Fax   +49-721-696988
>D-7500 Karlsruhe 1                          e-mail: jr@sade.ka.sub.org
>Germany                                             jr@resy2.kfk.de                                            

Thanks for the answer. My disk (as I said in the original post)
is in an external box (The original that came with it). I included
this answer because it was the only one sure of the problem and had
previous experience with it. Other answers included:

1) Check jumper settings
2) Bad or loose cable , terminator etc.
3) The disk is dying. Exercise your warranty
4) Voltage sensor deciding it does not have enough power to spin.
and this one:
5) Disk is getting hot. Fujitsu's have this problem. It happend to me.

I placed the disk away from my slab and I'll wait and see. The problem
did not re-occur yet since the original post about a week ago. (Fingers
crossed)
--
Wassim M. Jabi                            (313) 936-0229
Doctoral Program in Architecture, University of Michigan
2000 Bonisteel Boulevard  Ann Arbor  Michigan 48105-2313
wjabi@libra.arch.umich.edu             NeXTMail-friendly