🚀 go-pugleaf

I have installed a 1.2GB Fujitsu 2266 on an upgraded 040 cube and it works but
on startup I get 6 successive dialog boxes that say the drive is damaged and needs 
to be repaired.  The drive is mounted by the system immediately before
the dialog boxes appear and works fine.  I looks like the system thinks it
has the Fujitsu drive at every SCSI ID.  This is the only SCSI device on the bus
and I am booting from the optical.  The drive did not appear on bootup when I
had Maxtor drive on the bus.

Thanks for any help.

-Steve

may  6 08:03:21 localhost mach: fpu version 0x40
may  6 08:03:21 localhost mach: physical memory = 16.00 megabytes.
may  6 08:03:21 localhost mach: available memory = 14.98 megabytes.
may  6 08:03:21 localhost mach: using 16 buffers containing 0.12 megabytes of memory
may  6 08:03:21 localhost mach: nbic present
may  6 08:03:21 localhost mach: fc0 at 0x2114100 
may  6 08:03:21 localhost mach: scsi 53c90a controller, target 7, as sc0 at 0x2114000 
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd0 at sc0 target 0 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd1 at sc0 target 1 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd2 at sc0 target 2 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd3 at sc0 target 3 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd4 at sc0 target 4 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd5 at sc0 target 5 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: fujitsu m2266s-512 as sd6 at sc0 target 6 lun 0
may  6 08:03:21 localhost mach: 	disk label: untitleddisk
may  6 08:03:21 localhost mach: 	disk capacity 1029mb, device block 512 bytes
may  6 08:03:21 localhost mach: odc0 at 0x2112000 
may  6 08:03:21 localhost mach: od0 at odc0 slave 0
may  6 08:03:21 localhost mach: drive rom v8, servo rom v8
may  6 08:03:21 localhost mach: 	disk label: next_2.0_ext  label version: 3
may  6 08:03:21 localhost mach: 	lot: b0c19b  serial: 0145  date: 04/17/90  canon: 73  next: 0
may  6 08:03:21 localhost mach: od1 at odc0 slave 1
may  6 08:03:21 localhost mach: en0 at 0x2106000 
may  6 08:03:21 localhost mach: en0: ethernet address 00:00:0f:00:82:fa
may  6 08:03:21 localhost mach: ip protocol enabled for interface en0, type "10mb ethernet"
may  6 08:03:21 localhost mach: dsp0 at 0x2108000 
may  6 08:03:21 localhost mach: np0 at 0x200f000 
may  6 08:03:21 localhost mach: sound0 at 0x200e000 
may  6 08:03:21 localhost mach: root on od0
may  6 08:03:21 localhost mach: master cpu at slot 0.
may  6 08:03:21 localhost mach: the network is disabled or your computer isn't connected to it.
may  6 08:03:51 localhost netmsgserver[63]: could not find a working network interface - disabling the network
may  6 08:03:51 localhost netmsgserver[63]: autoconf: network_init failed: no network
--