Help! Attached CD-ROM and NeXT won't boot

Article View: comp.sys.next.hardware

Article #32

Back to comp.sys.next.hardware Previous Next

#32

From: Maureen Cyr
Date: Wed, 28 Oct 1992 07:26

20 lines
1023 bytes

Help! Help! I plugged in my CD-ROM (AppleCD 150, same Sony drive as in NeXT
CD-ROM) while my NeXT Cube '030 was on, then hit Command-tilde and restarted
the machine, hoping that my CD-ROM would be loaded.  What happened instead was
my SCSI no longer boots and nothing works.  Upon power up, the monitor window
appears with the following error:

  Exception #3 (0xc) 0x1f2

When I hit Command-Command-tilde and reboot the machine, the following is
printed out:

  Booting from SCSI target 0 lun 0
  commands section > 2048
  load failed

  blk0 boot:

Does anyone know what has happened?  Any help is much appreciated!

- Andy

Technical Details

Message-ID: <1clfbcINNfr4@network.ucsd.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!agate!netsys!news!network.ucsd.edu!mcyr

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!agate!netsys!news!network.ucsd.edu!mcyr
From: mcyr@weber.ucsd.edu (Maureen Cyr)
Newsgroups: comp.sys.next.hardware
Subject: Help! Attached CD-ROM and NeXT won't boot
Message-ID: <1clfbcINNfr4@network.ucsd.edu>
Date: 28 Oct 92 07:26:36 GMT
Organization: University of California, San Diego
Lines: 20
NNTP-Posting-Host: weber.ucsd.edu